Socket Mobile Barcode Scanner Setup (All Models)

FIRST TIME SETUP

Your Socket scanners use rechargeable batteries (included) to keep your store operating at full speed all day long

1. CHARGE YOUR BATTERIES

TURN LOCK ON UNDERSIDE OF SCANNER SO IT'S HORIZONTAL, REMOVE PANEL.

2. INSERT INCLUDED NiMH RECHARGEABLE BATTERIES

3. CHARGE SCANNER

PLUG ADAPTER INTO REGISTER SCANNER (OR CHARGING CRADLE).

*All scanners must be fully charged before first use - Fully charging the NiMH batteries can take up to 5 hours*

 

PAIR SCANNER TO iPAD

Once your scanner is fully charged we'll use Bluetooth Technology to connect the device to the iPad wirelessly.

 

4. TURN THE SCANNER ON

LISTEN FOR ONE (1) BEEP

5. HOLD DOWN BOTH BUTTONS SIMULTANEOUSLY

LISTEN FOR THREE (3) BEEPS

This step turns the scanner off.

6. TURN THE SCANNER BACK ON

Press the small button again until it beeps.

7. SCAN THIS BARCODE

HOLD THE SCANNER 1-2 FEET FROM SCREEN

LISTEN FOR MULTIPLE BEEPS

8. TURN THE SCANNER BACK ON

Press the small button again until it beeps.

9. SCAN ANOTHER BARCODE

HOLD THE SCANNER 1-2 FEET FROM SCREEN

LISTEN FOR MULTIPLE BEEPS (AGAIN)

10. GO TO SETTINGS ON THE iPAD

11. GO TO BLUETOOTH SETTINGS

 

12. TAP THE DEVICE TO CONNECT

13. WAIT FOR DEVICE TO CHANGE FROM "Not Connected" TO "Connected"

14. SCAN AN ITEM DURING A TRANSACTION

DON'T PRESS THE "ADD" BUTTON BEFORE SCANNING

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk