Configuring A&D EK1200i Scale

This is a step by step guide to configuring your EK1200i for either the Green Bits Weigh Station or Integrated Scale

 

  1. Hold down the ON button on the scale to turn it on. Let go of the ON button once the display changes.
  2. Hold down the SAMPLE button on the scale to enter the configuration menu. Let go of the SAMPLE button once the display changes.
  3. You should see “func” on the display. If you do not see “func”, press the SAMPLE button until you see “func” appear on the display. Press the ENTER/PRINT button to enter the serial configuration menu. You should see the display change.
  4. Press the SAMPLE button on the scale until you see “bPS”. Press the TARE button on the scale until the number to the right of “bPS” changes.
  • You want to change to 2 or 9600 bps for the Integrated Scale and Register.
  • You want to change to 0 or 2400 bps for the Weigh Station.

Press ENTER/PRINT to save this change. The display will change to CP hi.

Press the MODE button twice or until you return to the scale readings display.

Hold down the SAMPLE button on the scale to enter the configuration menu. Let go of the SAMPLE button once the display changes.

You should see “func” on the display. If you do not see “func”, press the SAMPLE button until you see “func” appear on the display. Press the ENTER/PRINT button to enter the serial configuration menu. You should see the display change.

Press the SAMPLE button on the scale until you see “btPr”. Press the TARE button on the scale until the number to the right of “btPr” changes to 2.

  • You want to change to 2 or 8 bits, non parity for the Integrated Scale and Register.
  • You want to change to 0 or 7 bits, even parity for the Weigh Station.

Press ENTER/PRINT to save this change. The display will change to CP hi.

Press the MODE button twice or until you return to the scale readings display.

Hold down the SAMPLE button on the scale to enter the configuration menu. Let go of the SAMPLE button once the display changes.

You should see “func” on the display. If you do not see “func”, press the SAMPLE button until you see “func” appear on the display. Press the ENTER/PRINT button to enter the serial configuration menu. You should see the display change.

Press the SAMPLE button on the scale until you see “Prt”. Press the TARE button on the scale until the number to the right of “Prt” changes to 0.

Press ENTER/PRINT to save this change. The display will change to CP hi.

Press the MODE button twice or until you return to the scale readings display.

Troubleshooting

  • If the scale isn't feeding weight into the register or weigh station, make sure all of the settings are at the defaults (with the little diamond symbol) on this doc EXCEPT the ones changed above.
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.